services
custom Silencers
Custom Work
- 1911’s
- Suppressors
- NFA
- Receiver blueprinting
- Re-barrel
- Chambering
- Barrel threading
- Metal checkering
- Muzzle break installation
- Custom grips
- Stock bedding: glass and aluminum pillar
- AK kit builds/ Trunnion swaps/ Barrel threaded
- All types of AR platform customization
- Glock Certified Armorer
- Smith and Wesson Certified Armorer
Trigger Job
A Trigger Job is not just reducing the pull weight of your trigger. It is an overall improvement to your triggers performance by removing creep, reducing pull weight, and reducing the reset to create a smooth overall trigger action and a more accurate firearm.
A Trigger Job is not just reducing the pull weight of your trigger. It is an overall improvement to your triggers performance by removing creep, reducing pull weight, and reducing the reset to create a smooth overall trigger action and a more accurate firearm. Having too much pull weight will reduce accuracy as you tend to pull yourself off target. With a reduced trigger pull weight you are able to maintain your sight picture and stay on target. No safeties are disabled in any way. I can do the standard trigger job without really reducing the trigger pull weight for those more comfortable with heavier a trigger. Trigger creep is that movement just before the hammer falls. When you take up the slack in your trigger until it stops, but doesn’t drop the hammer is not the creep. The creep is that slight movement that happens when you are at that stopping point and then pull to fire and the trigger has movement or travel before the hammer falls. We can get rid of that trigger creep and create a crisp clean break and reduce your pull weight with a professional trigger job.
Gun and Firearm repair
ACRW Gunsmithing is a licensed gunsmith providing gunsmith services, firearm repair and all general firearm needs.
ACRW Gunsmithing is a licensed gunsmith providing gunsmith services, firearm repair and all general firearm needs. We are a FFL license holder, so shipping your firearm is no problem.We are a certified and licensed full service gunsmith shop specializing in the repair, reconditioning and refinishing services for all types of Firearms. We have experience in all phases of service and repair, and stand behind all the work we do. Our estimates will never increase without prior customer approval. When needed, we make every effort to locate obsolete / rare / antique parts to complete your repair to your satisfaction. Some of our services include: Cerokote finishes, Duracoat finishes, Stock repair and refinishing, Trigger work, Glass Bedding, Gun Cleaning, installation of Recoil Pads, Barrel Crowning, Scope Mounting & Bore Sighting. If it's a Firearm we can fix it.
Gun Scope & Sight Mounting
The ultimate goal when using a firearm is to hit what you are aiming at. Having the proper sighting system as well as having it mounted correctly, is at the very root of having an accurate firearm.
GUN CLEANING
Here at ACRW, we have some of the latest a greatest technology to get your gun clean and functioning as safe as the day it was new. Of course, we use lots and lots of good old fashion elbow grease that gets the job done too. We use the latest in cleaning chemicals and oils in conjunction with state-of-the-art sonic cleaners, high-pressure steam cleaners, and fiber optic cameras. Along with our working knowledge and resources, you can be sure your gun will be cleaned and lubricated and returned in safe operating condition. Lubrication is a very crucial part as well. Too much lubrication can be just as bad as not enough. Knowing where, how and how much to use, as well as the correct type to use based on conditions and the type of firearm. These all play a key part in the proper functioning of a firearm.
glass bedding
Glass Bedding is an improvement process that involves remolding or filling in the inside of the stock where the action mounts into the stock. We use an epoxy or fiber glass mixture and pour it in the stock to conform to the bottom of the receiver. We apply a release agent to the receiver so the epoxy sticks to the wood and not the receiver, then put the receiver into the stock and tighten the action down. Then you let it dry. This results in a stock that conforms to the bottom of the barrel and the receiver. Glass bedding is a way to solve a problem when the gun is not shooting accurately. Whenever the gun is taken down to be cleaned, it allows the receiver to be tightened down in the same place every time. Glass bedding along with a good trigger job are probably the two most effective actions an individual can take to improve the accuracy of their gun/firearm.
Custom Work
- 1911’s
- Receiver blueprinting
- Re-barrel
- Chambering
- Barrel threading
- Metal checkering
- Muzzle break installation
- Custom grips
- Stock bedding: glass and aluminum pillar
- AK kit builds/ Trunnion swaps/ Barrel threaded
- All types of AR platform customization
- Glock Certified Armorer
- Smith and Wesson Certified Armorer
custom Job
What you see here are two original Dance Brothers revolvers from the 1800’s valued at over $250,000.00. The top one was missing the Bullet Seating Plunger. Our gunsmith took a bolt like the one shown in the photo and crafted the replacement part as well as making all new assembly screws. Outstanding work!!
ACRW BRANDED LOWER RECIVER
Here are the photos we promised of our new ACRW branded stripped billet lower receiver for the AR15 platform. Uncoated is $145.49. Duracoated colors are $165.49.
Custom Guns
Tell us what you want, and we can make it! A custom gun can be made for several reasons, but determining the end use and cost of a custom gun is certainly worthy of consideration. We do custom stocks, barrels, finishes, fittings, engraving and the list goes on. If you can dream it up, we can probably do it. So, whether it’s a rifle, muzzle loader, pistol, revolver or shotgun; or you are shooting competitions, target practicing, protecting loved ones or hunting that trophy Buck.
Gun Metal Finishing – Coating – Bluing and More
There are many coating options available from Bluing to Cerakote, Nickel Boron, Phosphating, Anodizing, Quench Polishing, Tenifer™ and more. We even do custom painting! Want full camo on your gun? We can do it! Obviously, these coatings are for specific applications. Some provide camo or visual appeal, while others protect against the elements and rust corrosion. Regardless of the finish you desire, ACRW Gunsmithing can handle all your gun metal finishing needs.
Custom Gun Stocks
ACRW is an expert in providing quality custom gun stock services. Tell us what you want, and we can make it!
- Stock Sizing and Fitting
- Recoil pad installation
- Leather covered recoil pads
- Adjustable Comb/soft comb
- Refinishing of gunstocks
- Custom Gunstocks
- Gunstock Checkering
- Gunstock cutting or extensions
and more…
Gun Metal Finishing – Coating – Bluing and More
There are many coating options available from Bluing to Cerakote, Nickel Boron, Phosphating, Anodizing, Quench Polishing, Tenifer™ and more. We even do custom painting! Want full camo on your gun? We can do it! Obviously, these coatings are for specific applications. Some provide camo or visual appeal, while others protect against the elements and rust corrosion. Regardless of the finish you desire, ACRW Gunsmithing can handle all your gun metal finishing needs.